After many purchases and tests, I have finally figured out how to make the Drift condenser microphone work with the GoPro HD Hero2 (even though Drift tried to say that their microphone only works with the Drift camera) so you can put the mic in your helmet to Vlog your thoughts away while you ride. It’s so simple I feel like an idiot and should have known better. All you need is an adapter from RadioShack to make the 2.5mm Drift male plug into your 3.5mm GoPro female. Shop Revzilla.com for Up to 40% Off Alpinestars Gear!
To install or setup your microphone in your helmet, here are the parts you need:
Drift Innovation Drift HD External Clip Mic HDCMIC (this can be bought separately and is made for using inside your helmet) as shown here on Amazon – just click on this image below to get the exact microphone we use in our videos and vloggs. The only place we could find it so far was on Amazon.
I’ve been testing the GoPro HD Hero2 (3.5mm female) with the Drift helmet microphone (2.5mm male). It doesn’t work (as noted by Drift). After researching tons of converter wires and reading tons of product descriptions and reviews, I finally found one that I thought would work. Headset Buddy. Wrong. It only works on mono mics like a cellphone. Doesn’t not work on GoPro because it’s stereo. Finally found one that says it will work. Ordered it so now I play the waiting game. COME ON GOPRO! NO HELMET MIC?? Somebody let me know when I can just order a condenser mic for inside my helmet when GoPro finally catches up with Drift.
So you just switched brands and decided to go with a Yamaha R1. Great choice by the way. And you got it home for the first time and you’re in a rush to look under the seat and under the plastics. Not everyone immediately knows how to take off the seat so to save you the extra minutes of poking around, we went ahead and shot a quick video to show you how to take the seat off and put it back on the right way. For everyone else, we have other videos on our R1 Videos page you might like instead.
R1Videos.com How To Remove Seat and Install Seat on R1
What’s up world? Hope everyone is riding safe out there and enjoying this warmer weather!
I just wanted to let yall know that I am still testing the new GoPro HD Hero2 cameras. I missed a shipment after moving so I am still waiting on the external microphones to arrive in the mail. Once I get them and test them out, we will do a video and post on how to use a Drift (that’s the brand) condenser microphone with the GoPro camera’s external microphone port using the skeleton case. The thing is, the Drift says it’s ONLY compatible with Drift cameras. That’s not true. The problem is that the Drift uses a 2.5 male jack and the GoPro uses a 3.5 female port. So what you have to do is order a small converter wire.
However, not just any converter will do and they all look the same and are generally described the same when you shop for them online. You need one that will convert and transmit sound that is microphone compatible. Most are NOT mic compatible and only do audio sound say when you want to convert the ports for using a headset or earphones. I did find one that I believe will work, but I want to be sure and test it first. Once I do, I’ll do a video review to let everyone know how to get the best microphone (Drift) for using with your GoPro external mic port. I’ll show you the best setup for a mic in your helmet for vlogging and also how to get the best sound from your engine without the clicking and wind sounds. Trust me, I’m doing some extensive testing to show you exactly how to get out there and film and record audio straight out of the box so you don’t have to hunt all over the internet to learn how to set this all up.
More to come. Stay visible. And check back to “Get Your Fix!”